oki Jet 2010sm free download

File name OkiJet 2010sm.rar

Chapter 1 1.1 Overview 1.1 OVERVIEW 1.1.01 General Information The OkiJet 2010 is the first thermal inkjet product to wear the Okidata name badge. The unit is a fully featured Windows-based, inkjet printer. This product is a Graphics Device Interface (GDI) printer. Data leaving the computer is "preformatted" for the printer. Very little printer circuitry is required for data handling. The received data is already formatted for the GDI printer. RAM in the printer is minimized. There is NO operator panel. The unit is controlled via software in the computer. The units print resolution is 600 by 300 dots per inch. Dual printhead design allows the unit to print color and true black without changing printheads. The unit utilizes an edge smoothing technique called Print Quality Enhancement Technique (PQET). This technique reduces the "jaggies" seen in slanted (italics) character set printouts. The OkiJet 2010 printer is a "Windows Based Host Printer". The printer can print from a DOS based program running in a Windows "DOS-based session", but it is not the best possible configuration. DOS is a very non-graphical based operating system. The OkiJet 2010 is a GDI printer. A parallel interface cable IS NOT shipped with the unit. The end user must purchase the interface cable separately. It must be capable of supporting bi-directional communications to connect the printer to the computer. This cable CANNOT be more than six (6) feet long. OKIJET 2010 ( 96-02-07 ) 1.2 Physical Specifications 1.2 PHYSICAL SPECIFICATIONS 1.2.01 Dimensions Width: 17.2 inches (43.6 centimeters) Depth: 23.3 inches (59.1 centimeters) Height: 13.5 inches (34.3 centimeters) 1.2.02 Printer Weight 9.4 pounds (4.3 kilograms) with no ink cartridges installed 9.75 pounds (4.42 kilograms) with two ink cartridges installed UPS Shippable OKIJET 2010 ( 96-02-07 ) 1.3 Power Requirements 1.3 POWER REQUIREMENTS 1.3.01 Input Power 120/220/240 Voltage Range 90 to 259 volts, AC 1.3.02 Power Consumption The numbers listed below are estimates. less than 2 W Power OFF 7.5 W Idle Mode 12 W Printing Mode Average 25 W Printing Mode Peak 1.3.03 Power Frequency 50/60 Hz 1.3.04 Energy Star Rating The product qualifies for the Environmental Protection Agency (EPA) Energy Star Program, a cooperative effort between the EPA and computer and peripheral manufacturers to promote energy efficient equipment and to reduce air pollution caused by power generation. The Energy Star emblem does not represent EPA endorsement of any product or service. OKIJET 2010 ( 96-02-07 ) 1.4 Environmental Conditions 1.4 ENVIRONMENTAL CONDITIONS 1.4.01 Acoustic Rating Printing 45 dBA Idle not measurable 1.4.02 Altitude 10,000 feet (3,048 meters) 1.4.03 Ambient Temperature and Relative Humidity (RH) Operation Temperature: 65 to 80 degrees Fahrenheit (18 to 26.7 degrees Celsius) Relative Humidity: 30% to 60% Storage Temperature: 50 to 110 degrees Fahrenheit (10 to 43 degrees Celsius) Relative Humidity: 8